Eflite Blade mQX
It's sleek. It's high-tech. It's an RC flying experience unlike any other. It's the exciting Blade® mQX; the world's first quad-copter equipped with the advanced AS3X™ (Artificial Stabilization in 3-Axis) System. The sense of precise control this system gives an mQX pilot rivals that of bigger quad-copters that cost a whole lot more. Indoors or out, breezy conditions or calm, you'll find that you can fly the mQX with complete confidence just about anywhere, anytime. And it's so simple to set up, anyone with experience flying conventional RC helis will find it's the perfect introduction to quad-copter fun.

Key Features

AS3X 3-axis stabilization system
4-in-1 DSM2™ receiver/ESCs/mixer/AS3X sensor unit
Durable, lightweight airframe
Potent 8.5mm brushed motors with protective drive gear guards
Can be flown in “X” or “+” configurations
Sleek, low-profile body with sharp mQX graphics
Includes E-flite® 1S 3.7V 500mAh Li-Po battery
Includes E-flite® Celectra™ 1-cell DC variable rate Li-Po charger

E-Flite Blade SR UH-1 Huey Gunship RTF
This is the SR UH-1 Huey Gunship RTF helicopter. The Huey was the first turbine powered helicopter to enter production for the US Military and is most famously know for it’s service in the Vietnam War. This scale licensed Huey body is based on that famous helicopter and combined with the SR flight characteristics, is a great combination of scale and performance for a Ready to Fly. This SR Huey, based on the popular SR RTF helicopter, is a great helicopter for anyone who has flown a single-rotor fixed-pitch helicopter. It comes out of the box programmed to provide a softer climb, pitch and roll response around the center of stick movement. This, combined with the tough, two-piece main frame and lower head speed, makes the Blade SR more forgiving and easier to master than most conventional CP helis. Plus, it’s big enough to fly outdoors even if there’s a little wind.

• Scale UH-1 Huey Gunship Helicopter body gives that scale look in an RTF platform
• Uses the proven Blade SR platform so that you have a known and reliable set up
• Complete with the 6-channel HP6DSM 2.4GHz transmitter
• Factory assembled and test flown allows for out of box flying experience
• Direct drive tail motor power system for improved power and response

Eflite Blade MCX
The Blade® mCX is an ultra micro-sized version of the Blade CX/CX2, offering first-time pilots the ability to learn how to fly with ease and experienced heli pilots the ability to fly anytime, anywhere indoors. The Blade mCX offers unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum™ 2.4GHz DSM2™ control. And, thanks to its rotor span of just 7.5 inches and one-ounce flying weight, the Blade mCX can be flown indoors almost anywhere—from an office to a small bedroom or living room. The Blade mCX comes 100% factory-assembled, flight-tested and ready to fly right out of the box—no assembly or setup required. Included in the box is the Li-Po battery and convenient AA battery-powered DC Li-Po charger, 4-channel transmitter equipped with Spektrum 2.4GHz DSM2 technology, and 8 AA batteries (4 for the transmitter, 4 for the charger). The DSM2 technology offers freedom from frequency restrictions and allows the Blade mCX to be flown anywhere, anytime indoors with precise 4-channel control. When it comes to ultra-micro heli fun everyone can enjoy, you simply can’t beat the value and performance of the Blade mCX. It’s just another way E-flite is advancing electric flight.

Eflite Blade MCPX
This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning. It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. A ready-to-fly version with 2.4GHz DSM2 transmitter and a Bind-N-Fly version without transmitter, for those who already own a DSM2 aircraft transmitter, are available. Both variations include two 1S 200mAh 25c batteries, single port charger with AC adapter and a 1s High Current Ultra-Micro Battery Adapter Lead. Using an integrated AS3X™ Digital Flybarless System, the heli gets up in the air without a mechanical flybar. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mCP X a sense of stability and responsiveness no other collective-pitch heli its size can match. The Bind-N-Fly mCP X comes assembled with everything you need to fly in the box except a transmitter. Just charge the battery and bind the helicopter to any DSM2 compatible aircraft transmitter, and you'll be flying in no time.

Key Features

AS3X™ Digital Flybarless System
Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use.
Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes.
Very low discloading results in high maneuverability and good collective response.
Lightest heli in its class.
Two sets of blades included, fast-flight and high-performance.
Robust, long-lasting dual-ball bearing supported linear cyclic servos.
Two high-performance flight batteries included.

Eflite Blade MSRX
Blade raises the bar yet again with the mSR X; the world's first fixed-pitch ultra micro heli with advanced AS3X™ flybarless stabilization. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mSR X a sense of stability and responsiveness no other fixed-pitch heli its size can match.

E-Flite Blade CX2
With the new Blade CX2 takes the excitement and beginner-friendly flight stability of the original Blade CX and adds Spektrum 2.4GHz DSM radio control that lets you fly anywhere, anytime without ever having to worry about interference. It’s the first ready-to-fly RC aircraft of any kind to come with this extraordinary technology built in. In addition, the 4-in-1 control unit has been updated with improved gyro and tail control that gives the Blade CX2 even better tail response while minimizing drift. Two feather-light S60 Super Sub-Micro Servos provide powerful, precise cyclic control. Topping it all off is an aggressive new body design that looks fantastic in flight and is unlike anything else out there. When it comes to micro heli fun everyone can enjoy, you simply can’t beat the value and performance of the Blade CX2..

• Coaxial, counter-rotating blade rotor head design provides incredible stability and positive control
• interference-free 5-channel E-flite transmitter with built-in Spektrum 2.4GHz DSM technology
• Advanced 4-in-1 control unit including 2.4GHz DSM 6-channel receiver, main motor ESCs, mixer and gyro
• No installation or assembly required
• Two feather-light S60 Super Sub-Micro Servos—just 6.0 grams each
• 800mAh 2-cell Li-Po battery pack is low weight, high power and provides flight durations of 10-15 minutes per charge
• 2-3 Cell DC Li-Po Balancing Charger and AC Adapter

E-Flite Blade 400 3D RTF
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision. The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2™ 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.

* Completely assembled and tested at the factory
* Capable of sport flying and 3D aerobatics right out of the box
* Includes Spektrum’s DX6i 2.4GHz DSM2 6-Channel computer programmable transmitter and factory-installed AR6100e Microlite receiver
* DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control
* 420H brushless motor, 25-amp brushless ESC and 3S 11.1V 1800mAh 20C Li-Po battery deliver incredible power and performance
* CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages
* Stainless steel flybar, main shaft and tail shaft

E-Flite Blade 450 3D RTF
The Blade 450 3D RTF blasts ready-to-fly 3D heli performance to new levels of precision and power. It comes completely assembled and equipped for aggressive 3D aerobatics with state-of-the-art electronics and mechanics you would expect to find in more expensive kits that take hours to build. It's even been flight tested and had the rotors balanced at the factory so you don't have to do any setup. Simply charge its 3S 2200mAh 30C Li-Po battery and fly.

*The DS76-series servos are specially designed to deliver maximum power and precision for extreme 3D heli flight
*The G210HL gyro uses the latest in MEMS technology to provide amazing holding power during the most aggressive 3D maneuvers
*The robust 35A speed controller is engineered to efficiently channel the high-current flow of most any high-C 3S Li-Po battery
*The compact 4.0-gram AR6115e receiver provides the superior response of Spektrum DSM® control as well as the benefit of ServoSync which dramatically enhances the precision of any CCPM heli
*The rotor head mechanics have been optimized to provide the most aggressive 3D control response possible
* Includes the Spektrum DX6i with two pre-programmed flight profiles — one for intermediate pilots and another for experienced 3D pilots