Hyperion EOS0615i Duo III Dual Port all in One Balancing Charger

NEW! SUPER POWER, DUAL CONVENIENCE EOS 0615i DUO3 DC INPUT 11V~28V 6S Max, 180W 15A Max Charge Per Port , 50W+50W 10A Discharge SYNC Charge up to 2x6S for max 12S Flightpacks at 360W max. See explanation of SYNC MODE charging below. DUO3 Changes vs. Previous DUO2: * 12-Bit Balance Circuit Resolution for superb accuracy * Built-In USB DataPort and supplied USB cable * Hardware support for PC Control & Logging Software (Bi-Direction release before Dec 2009. Logging available now.) * 20 Memory slots for batteries per port (40 total) * CYCLE mode for LiFePO4 and LiPo * Max Current per port raised from 10A to 15A

Hitec X1 AC Plus Battery Charger

We raised the bar on the X4 and equipped it with a built-in AC power supply. Our new X4 AC Plus, has four-port computer controlled capability with a built-in 22 amp power supply which can be powered by standard 120 volt AC household current. Simple to use and utterly reliable, this compact charger with battery management and integral balancer features four identical and independent 50-watt power outputs, for a total output power of 200 watts. Each port of the X4 AC Plus can handle up to a 6S Lithium pack, 15 NiCd/NiMH cells or 6-12 volt lead acid batteries. Four individual balancing ports eliminate the need for a separate balancer when charging Lithium batteries. Its twin fan cooling system with an internal sensor for controlling fan speed provides the utmost in efficiency and safety. The X4 AC Plus can accept a variety of power inputs including the option of attaching it to a 12-volt car battery or a 11–15 volt (20 amp minimum) DC power supply. The Hitec X4 AC Plus charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.

Hitec Ultima Two-Channel Charger

Recharging your high amperage batteries has never been easier or more affordable than with our X2 Ultima two-channel charger. Featuring dual 200-watt power ports, this efficient charger will charge two Lithium, NiCd, NiMH or Lead Acid packs at once. It is capable of delivering 10 amps of charging current and can discharge your packs at up to 5 amps for efficient battery maintenance. Perfect for all electric aircraft and surface hobbyists, the X2 Ultima will power your larger batteries in a short period of time and at a price that can't be beat.

Hitec Multi-Charger X4

NEW! The Hitec X4 Multicharger is a four channel computer controlled charger. This compact charger with battery management and integral balancer is simple to use and reliable. It features four identical and independent 50-watt power outputs, for a total output power of 200 watts. Each output can handle up to 15 NiCd/NiMH cells, or up to 6S Lithium pack simultaneously. Four individual balancing ports eliminate the need for a separate balancer when charging Lithium batteries. Equipped with a twin fan cooling system which has an internal sensor for controlling fan speed, the X4 Multicharger charger is both efficient and safe. Charge your batteries and take charge of your hobby.

The Hitec X4 Multicharger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.

20A Power suppy required

Hitec X4 AC+ 4 Channel AC/DC Charger

We raised the bar on the X4 and equipped it with a built-in AC power supply. Our new X4 AC Plus, has four-port computer controlled capability with a built-in 22 amp power supply which can be powered by standard 120 volt AC household current. Simple to use and utterly reliable, this compact charger with battery management and integral balancer features four identical and independent 50-watt power outputs, for a total output power of 200 watts. Each port of the X4 AC Plus can handle up to a 6S Lithium pack, 15 NiCd/NiMH cells or 6-12 volt lead acid batteries. Four individual balancing ports eliminate the need for a separate balancer when charging Lithium batteries. Its twin fan cooling system with an internal sensor for controlling fan speed provides the utmost in efficiency and safety. The X4 AC Plus can accept a variety of power inputs including the option of attaching it to a 12-volt car battery or a 11–15 volt (20 amp minimum) DC power supply. The Hitec X4 AC Plus charger offers a complete charging solution for novice and expert RC enthusiasts alike. The multi-tasking versatility of this new charger makes it a perfect fit for nitro and electric modelers, regardless of what you drive, hover, float or fly.

Hyperion EOS0610i Duo Balancing Charger

NEW! Hyperion EOS 0610i 6S 16N CHARGER, with Integrated LBA10A balancer All EOS610 Duo chargers have been updated with the newest firmware upgrade 1.1

• The 2 Line LCD for charge monitor and post data display
• 1-6 Cells Lithium Polymer
• 1-6 Cells Lithium Ion
• 1-6 Cells A123
• 1-16 Cells Nicd/Nimh
• 1-12 Lead Acid
• Adjustable Power Sharing (%) Between Outputs
• 2 Built-in LBA10 Balancers
• 0.1 ~ 10.0A Charge Current
• 360-Watts Max Output
• TCS – Terminal Capacity Selection
• PC Port for Data Logging and Firmware Upgrades
• Temp Sensor Ports * Wide Voltage Input Range 11v~28v
• Power Supply Amperage Control to allow reliable with lower-output power supplies
• Power Supply Voltage Control (PS Load Control) works in concert with Amperage control to insure the charger does not overload your power supply
• Output Cords Included * Dual Cooling Fan
• 20 User Definable Memory Positions
  
  

Hyperion LBA 10 Balancer

New version! Now supports A123 Li-Fe cells! New Hyperion EOS LBA10 Net - The Most Powerful, Versatile Balance-Safety Adapter for Lithium Packs - Max 6S, 10A rating - Network 2 units for 7S~12S balancing. The Hyperion EOS Lithium Balance Adapter 10 (LBA10) is the newest, most feature-packed and reliable lithium balancer on the market today, and comes at a bargain price. Simply put, it is the most powerful, versatile, and safest way to charge your lithium packs today. A single LBA10 provides three ways to balance your lithium packs from 2S to 6S, at a maximum of up to 10-ampere rate! Or, you can network two LBA 10 together with NET cable and adapter pack #HP-EOSLBA10-MSC. Set one LBA10 to Master and one to Slave mode. Series the LBA input leads together, and connect to a charger with appropriate S rating. Now you can charge two packs of same cell type and capacity (such as 6S and 6S) at the same time, and every cell in both packs will be balanced to the other when charging is done. Connect the packs in series and fly, with balanced packs from 7S to 12S in this way! Or, say you have two 5S chargers, and want to charge two 5S packs to connect and fly as 10S. Use each LBA10 in Master mode, and connect each to a separate charger and battery. When charging is finished, Connect the two LBA10 together in Master-Slave configuration, and connect them to the just-charged lithium packs. The LBA10 will work together until every cell in the two packs are balanced together, then automatically shut down. Takes only a few minutes. Now series the packs together and fly in peace! Each LBA 10 comes with balance harnesses for 2S and 3S packs. For 4S to 6S packs, get the appropriate optional harnesses.

Hyperion EOS0606i AC/DC Balancing Charger

NEW! Hyperion EOS 0606i 6S 6A max CHARGER AC/DC, with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC and 100v~240V AC Inputs - Hyperion Balance Multi-Adapter included for 2S to 6S packs!

• 2 input power choices: Use AC 100V~240V or DC11V~15V
• Powerful, yet compact and portable with wide support for battery types
• Inegrated Hyperion LBA Balancer for Lipo & A123 based cells
• Balance Multi Adapter for 2S to 6S Packs Included
• Charge and Discharge Modes (and cycling for Nimh and Nicd)
• Clear and easy to read LCD Screen with warnings common setup errors
• Aluminum Case, Long Input Leads
• Support Battery Types: 1-14cell NiCD & NiMH, 1-6 Lipo, Lion & Lead Acid
• Charge Current: 0.1A~6A Max
• Discharge Current: 0.1A~1.0A Max
• Trickle Charge: 0 ~ 200Mah Display: 2-Line 16 Character Blue Backlit
• OUTPUT CORDS NOT INCLUDED WITH EOS0606I
  
  

Hyperion EOS0606i Balancing Charger

NEW! Hyperion EOS 0606i 6S 6A max CHARGER, with Integrated LBA balancer. LiPoly(3.7v), LiFePO4/A123(3.3v), Nicd, NiMH, and Lead-Acid charge modes. Dataport for PC software. 11v~15VDC - Hyperion Balance Multi-Adapter included for 2S to 6S packs!

• Powerful, yet compact and portable with wide support for battery types
• Inegrated Hyperion LBA Balancer for Lipo & A123 based cells
• Balance Multi Adapter for 2S to 6S Packs Included
• Charge and Discharge Modes (and cycling for Nimh and Nicd)
• Clear and easy to read LCD Screen with warnings common setup errors
• Aluminum Case, Long Input Leads
• Support Battery Types: 1-14cell NiCD & NiMH, 1-6 Lipo, Lion & Lead Acid
• Charge Current: 0.1A~6A Max
• Discharge Current: 0.1A~1.0A Max
• Trickle Charge: 0 ~ 200Mah Display: 2-Line 16 Character Blue Backlit
• OUTPUT CORDS NOT INCLUDED WITH EOS0606I
  
  

Great for a huge variety of battery types (NiCd, NiMH, LiPo and Li-Ion, and lead-acid), and applications such as electric airplane and heli batteries, Tx and Rx batteries, car and boat batteries, field batteries, and more. Triton2 adds upgraded features to the design of the revolutionary original Triton charger, famous for its high performance, versatility, and rugged durability. Charge current is increased to 7A. The custom LCD now includes a blue backlight for easy viewing. T2 can handle LiPo packs with up to 5 cells in series. The input cord has installed banana plugs, and large attachable alligator clips are included. The modified programming dial is easier to control. And a slight programming change, plus a totally recreated instruction manual for ease of use and understanding.

Upgraded features from original Triton:
* Handles LiPo batteries with up to 5-cells in series.
* Maximum charge current is increased to 7 amps.
* The custom 32 character LCD now includes a blue back-light for easy viewing anytime.
* A new control dial, updated programming changes, and improved instructions for easier programming.
* Banana plugs on the input lead, and includes mating alligator clips for easy connection to input power sources.

Also includes these standard features:
* Precision peak detection with adjustable sensitivity for NiCd and NiMH batteries.
* "Constant current / constant voltage" charge method for LiPo/Ion and Pb batteries.
* Temperature monitoring option (GPMM3151 Thermal Probe required).
* Top-off charge feature fully charges NiMHs without overheating.
* 0-250mA adjustable trickle charge current (NiCd and NiMH only)
* 0.1-3.0A adjustable discharge current.
* Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion.
* Perform 1 to 10 cycles (NiCd/MH only).
* Recall data for 10 full cycles.
* Configure up to 10 batteries in memory for instant, easy recall and charger setup
* Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, and error messages.
* Audible sound cues aid in programming and notification of function changes.
* Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection.
* Built-in cooling fan, for better charge efficiency and extends life of charger.
* Small and lightweight, with a super-sturdy aluminum case for rugged durability.

Multiplex LN-5014 Multi-Charger

The LN-5014 will safely charge and discharge all Lithium, NiCd, NiMH and Lead-Acid battery packs and cells. An easy to read, Illuminated digital LCD screen displays battery type, charge/ discharge, mAh, voltage and charging time, enhancing the charging experience. To insure proper use, the LCD screen will also display error messages for out-of range input voltage, incorrect connection or reversed polarity, poor battery condition and internal errors. This easy to use charger, with its 4 button control panel and logical menus, is compact and simple to transport to the flying field or track

Thunder Power TP-425 charger is specially designed to charge Lithium-Polymer Battery Only. Do NOT attempt to charge any other batteries such as Ni-Cd, or Ni-MH, and SLA battery. Please carefully read and understand about the Lithium Polymer battery safeties before charging your batteries. Do NOT charge Li-Poly batteries unattended. TP-425 comes with both Input and Output Red/Black gator clips.

Features:

• Ultra high speed digital power system
• Light weight and fully capable to charge up to 2500 mA/4-cell in series
• Easy setting for various battery pack parameters
• Reverse polarity protection circuitry (Input/Output)
• Easy monitoring indicators (current and voltage charge status)
• Beep alerts fault conditions, or charge is complete
• Safe mode automatic cell count

Specifications:

• Input power source: 11 to 15 VDC, requires 4A to charge at max rate
• Charge Voltage: 3.7V, 7.4 V, 11.1V, and 14.8V ( 1 to 4 cells in series)
• Charge current: 300mA, 500mA, 800mA, 1300mA, 2000mA, and 2500mA
• Full charge voltage: 4.2V per cell
• Size: 1.62" x4.0" x 0.62" (42mm x 102mm x 16.2mm)

Thunder TP-205 Cell Balancer

2-5 cell Smart balancer Auto balance (active if more than 0.005V imbalance) Over voltage safety alerts (also shut-off TP charger if detected any 4.3V cell during charging)

Auto Cell detect for any 2 to 5 cell packs
Check and display battery conditions
Imbalance voltage warning
Over voltage warning
LEDs display each cell in bleeding/balancing
Alerts full charge status
Built-in data port for interfacing with TP chargers, or other options

Electrifly Equinox Balancer

Sometimes, all it takes to turn jitters before a maneuver into an "Ahhh!" afterwards is just a little bit more power from your pack. That requires getting the most from each cell – and that's where ElectriFly excels. Top-quality Power Series LiPo packs discharge at an impressive 20C rate. And now, they're available in balanced packs which allow you to equalize (balance) the voltage of each cell in a pack. The Equinox LiPo Cell Balancer offers two easy ways to equalize cells and maximize pack performance. Connect it directly to a balanced pack, and it's a gentle cell-by-cell discharger. It starts by bringing the voltages of all cells into balance, and then monitors each cell until it's completely discharged. As a result, the voltages of individual cells end up within just a few millivolts of each other. Connect the Equinox between a balanced pack and a LiPo charger, and it brings all cells into balance at the same voltage, before charging each cell to its absolute, individual peak of power. Using the Equinox LiPo Cell Balancer to discharge or charge is good. Doing both not only ensures maximum voltage from the pack, but longer pack life, as well.

* Balance Adaptor for Thunder Power Batteries
* Easy, push-button operation
* Automatically checks for "bad" cells
* Charges at up to 3A (or 6A w/GPMM3163 [available separately])
* Adapters for 7.4V and 11.1V packs included. (Adapters for 14.8V and 18.5V packs available separately)
* 8 status LEDs for easy monitoring
* Includes gold-plated banana plugs * Compact: 3.2 x 1.6 x 0.6 in (82 x 40 x 15 mm)
* Lightweight: 1.55 oz (44 g)
* Overload-protected