If you're looking for an R/C model that is easy to build and exciting to fly, the KOUGAR Mark II is for you! This sleek jet-style airplane has a fully symmetrical wing section for smooth pattern-like aerobatics. Ample wing area and a thick airfoil provide outstanding slow speed stability. Built-in wing “washout” eliminates tip stalling, enabling the KOUGAR to be slowed down to a walk for realistic nose-high landings. The KOUGAR is highly recommended as an introduction to low-wing flying and learning aerobatics. Don’t let the KOUGAR’S racy lines worry you. Construction of this sport model is simple and straight forward. The load-carrying and equipment-carrying portion of the fuselage is basic balsa box structure. Once that is built, you add a molded plastic fuselage top, a molded clear plastic canopy, and a molded plastic cowling, to give the KOUGAR its modern jet-style shaped.

KIT FEATURES
Pre-Cut Foam Wing Cores
1/16 " Balsa Wing Sheeting
Basic Balsa Box Fuselage Structure
Molded ABS Plastic Fuselage Top
Molded Jet-Style Clear Canopy
Sheet Balsa Tail Surfaces
Injection-Molded ABS Plastic Cowling
Formed Landing Gear Wires
Steerable Nose Gear
SIG Easy Hinges
Engine Mounts
Complete Hardware Pack
Photo-Illustrated Instruction Book